Spirent Journal of Test Methodologies | © Spirent Communications 2010
Introduction
Today’s Devices Under Test (DUT) represent complex, multi-protocol network elements with an emphasis
on Quality of Service (QoS) and Quality of Experience (QoE) that scale to terabits of bandwidth across the
switch fabric. The Spirent Catalogue of Test Methodologies represents an element of the Spirent test
ecosystem that helps answer the most critical Performance, Availability, Security and Scale Tests (PASS)
test cases. The Spirent Test ecosystem and Spirent Catalogue of Test Methodologies are intended to help
development engineers and product verification engineers to rapidly develop and test complex test
scenarios.
How to use this Journal
This provides test engineers with a battery of test cases for the Spirent Test Ecosystem. The journal is
divided into sections by technology. Each test case has a unique Test Case ID (Ex. TC_MBH_001) that is
universally unique across the ecosystem.
Tester Requirements
To determine the true capabilities and limitations of a DUT, the tests in this journal require a test tool that
can measure router performance under realistic Internet conditions. It must be able to simultaneously
generate wire-speed traffic, emulate the requisite protocols, and make real-time comparative
performance measurements. High port density for cost-effective performance and stress testing is
important to fully load switching fabrics and determine device and network scalability limits.
In addition to these features, some tests require more advanced capabilities, such as
Integrated traffic, routing, and MPLS protocols (e.g., BGP, OSPF, IS-IS, RSVP-TE, LDP/CR-LDP) to
advertise route topologies for large simulated networks with LSP tunnels while simultaneously
sending traffic over those tunnels. Further, the tester should emulate the interrelationships
between protocol s through a topology.
Emulation of service protocols (e.g., IGMPv3, PIM-SM, MP-iBGP) with diminution.
Correct single-pass testing with measurement of 41+ metrics per pass of a packet.
Tunneling protocol emulation (L2TP) and protocol stacking.
True stateful layer 2-7 traffic.
Ability to over-subscribe traffic dynamically and observe the effects.
Finally, the tester should provide conformance test suites for ensuring protocol conformance and
interoperability, and automated applications for rapidly executing the test cases in this journal.
Further Resources
Additional resources are available on our website at http://www.spirent.com
