惠普HP LSI SAS 9217 4i4e P20 UEFI固件

***************************************************** LSI Corporation SAS2 MPT UEFI BSD HII Driver Release ***************************************************** ====================== Supported Controllers: ====================== SAS2004 SAS2008 SAS2108 SAS2116 SAS2208 SAS2308 Component: ========= Binary image name: ebcsas2.rom (for Flashing on EBC Compatible supported Platforms) Binary image name: ebcsas2.efi (for Shell load test on EBC Compatible supported platforms) Binary image name: x64sas2.rom (for Flashing on X64 platforms) Binary image name: x64sas2.efi (for Shell load test on X64 platforms) For all practical purposes use x64sas2.rom file. Installation: ============= Use SAS2Flash.efi to install the SAS2 BSD HII Driver binary. The SAS2Flash utility is included in the package zip file. UEFI version of SAS2Flash can be downloaded from the Support & Downloads section of www.lsi.com. The command line installation instruction to flash the UEFI SAS2 BSD HII Driver is: 1. Run 'drivers' command under uefi shell 2. Locate the driver handles for existing SAS2 MPT Drivers 3. unload <dh> where <dh> is the driver handle for already loaded driver. 4.sas2flash -c <n> -b ebcsas2.rom (for EBC compatible supported platforms) or sas2flash -c <n> -b x64sas2.rom (for X64 platforms) where <n> is the controller number (starting with zero (0)). If you need further help, please contact the LSI FAE associated with your Organization. Notes: 1) UEFI BSD with or without HII does not require Legacy BIOS to be loaded on to the controller. 2) A latest Firmware either IR or IT version with proper NVData is required. 3) To load the images for testing under shell only: a. load ebcsas2.efi or loadpcirom ebcsas2.rom or load pcirom x64sas2.rom