上G0/0/9和G0/0/10接口的速率。
首先修改交换机的设备名称,然后查看S1上G0/0/9和G0/0/10接口的详细
信息。
<Quidway>system-view
[Quidway]sysname S1
[S1]display interface GigabitEthernet 0/0/9
GigabitEthernet0/0/9 current state : UP
Line protocol current state : UP
Description:
Switch Port, Link-type : trunk(negotiated),
PVID : 1, TPID : 8100(Hex), The Maximum Frame Length is 9216
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is d0d0-4ba6-aab0
Current system time: 2016-11-23 14:18:37
Port Mode: COMMON COPPER
Speed : 1000, Loopback: NONE
Duplex: FULL, Negotiation: ENABLE
Mdi : AUTO, Flow-control: DISABLE
Last 300 seconds input rate 256 bits/sec, 0 packets/sec
Last 300 seconds output rate 912 bits/sec, 0 packets/sec
Input peak rate 13976 bits/sec, Record time: 2016-11-22 14:59:12
Output peak rate 13976 bits/sec, Record time: 2016-11-22 14:59:12
Input: 8802 packets, 1242101 bytes
Unicast: 854, Multicast: 7017
Broadcast: 931, Jumbo: 0
Discard: 0, Pause: 0
Frames: 0
Total Error: 0
CRC: 0, Giants: 0
Jabbers: 0, Fragments: 0
Runts: 0, DropEvents: 0
Alignments: 0, Symbols: 0
Ignoreds: 0
Output: 53495 packets, 7626413 bytes
Unicast: 231, Multicast: 49564
Broadcast: 3700, Jumbo: 0
Discard: 0, Pause: 0
Total Error: 0
Collisions: 0, ExcessiveCollisions: 0
Late Collisions: 0, Deferreds: 0
Buffers Purged: 0
评论0
最新资源