![GitHub Logo](https://github.com/technosar/media/blob/master/grbl32%20logo.png)
***
### Grbl v1.1 STM32F7 has been released !
***
```
New features :
- 8 axis (X, Y, Z, A, B, C, U and V compatible with OpenPnP project)
- external SPI EEPROM
- M200 wait end of motion
- M62 set outputs
- M63 reset outputs
- M66 wait input event
- M100 map Z axis (select Z or U axis for OpenPnp project)
```
***
Grbl **STM32** is a no-compromise, high performance, low cost alternative to parallel-port-based motion control for CNC milling. It will run on a STM32F746 (Open746I-C Standard from **[Waveshare](https://www.waveshare.com/product/mcu-tools/stm32/open/open746i-c-standard.htm)**).
The controller is written in highly optimized C utilizing every clever feature of the STM32-chips to achieve precise timing and asynchronous operation. It is able to maintain up to **200kHz** of stable, jitter free control pulses.
It accepts standards-compliant g-code and has been tested with the output of several CAM tools with no problems. Arcs, circles and helical motion are fully supported, as well as, all other primary g-code commands. Macro functions, variables, and most canned cycles are not supported, but we think GUIs can do a much better job at translating them into straight g-code anyhow.
Grbl includes full acceleration management with look ahead. That means the controller will look up to 18 motions into the future and plan its velocities ahead to deliver smooth acceleration and jerk-free cornering.
* Licensing: GRBL STM32F7XX is free software, released under the GPLv3 license.
* For more information and help, check out our **[Wiki pages!](https://github.com/technosar/GRBL_STM32/wiki)** If you find that the information is out-dated, please to help us keep it updated by editing it or notifying our community! Thanks!
* Lead Developer [_2011 - Current_]: Sungeun(Sonny) K. Jeon, Ph.D. (USA) aka @chamnit
* Lead Developer [_2009 - 2011_]: Simen Svale Skogsrud (Norway). aka The Originator/Creator/Pioneer/Father of Grbl.
* Lead Developer [_2019 - Current_]: TECHNOSAR
***
```
List of Supported G-Codes in Grbl v1.1 STM32F7XX:
- Non-Modal Commands: G4, G10L2, G10L20, G28, G30, G28.1, G30.1, G53, G92, G92.1
- Motion Modes: G0, G1, G2, G3, G38.2, G38.3, G38.4, G38.5, G80
- Feed Rate Modes: G93, G94
- Unit Modes: G20, G21
- Distance Modes: G90, G91
- Arc IJK Distance Modes: G91.1
- Plane Select Modes: G17, G18, G19
- Tool Length Offset Modes: G43.1, G49
- Cutter Compensation Modes: G40
- Coordinate System Modes: G54, G55, G56, G57, G58, G59
- Control Modes: G61
- Program Flow: M0, M1, M2, M30*
- Coolant Control: M7*, M8, M9
- Spindle Control: M3, M4, M5
- Valid Non-Command Words: F, I, J, K, L, N, P, R, S, T, X, Y, Z
```
-------------
Grbl is an open-source project and fueled by the free-time of our intrepid administrators and altruistic users. If you'd like to donate, all proceeds will be used to help fund supporting hardware and testing equipment. Thank you!
Her101
- 粉丝: 26
- 资源: 4667
最新资源
- STM32 IAP串口固件升级方案与上位机调试助手:一键操作,轻松实现固件更新,stm32 iap串口升级固件方案,提供上位机调试助手 ,核心关键词:STM32; IAP(In-Application
- geoipupdate-2.5.0-2.el7.x64-86.rpm.tar.gz
- LabView与Cognex框架集成:视觉处理流程详解,包括图像采集、处理、标定与内存管理,【labview联合cognex框架代码】 【主要包含内容】 1加载vpp,运行vpp,获取vpp结果数
- geoipupdate-cron-2.5.0-2.el7.x64-86.rpm.tar.gz
- 基于改进麻雀搜索算法的配电网优化模型研究:考虑可转移负荷与分布式能源的综合分析(附结果图5张),配电网优化模型matlab 考虑可转移负荷、中断负荷以及储能、分布式能源的33节点系统优化模型,采用改进
- geolite2-city-20180605-1.el7.x64-86.rpm.tar.gz
- geolite2-country-20180605-1.el7.x64-86.rpm.tar.gz
- "MD380与MD500变频器源码解析:高效转子电阻与漏感辨识方法,适用于TMS320F系列处理器",md380 md500, 变频器源码,全C,77版本,程序已验证,可提供HEX或.OUT文件供您测
- 基于Logistic函数的负荷需求响应模型:考虑电价激励下的实际负荷转移率研究及MATLAB编程实现,负荷需求响应模型 基于Logistic函数 采用matlab编程,考虑电价激励下的乐观响应和悲观响
- Labview与三菱FX3u PLC串口Modbus通讯,简单读写地址,PLC通讯参数直接设置,源码演示,无需额外编程的无协议通信实践,Labview与三菱FX3u串口通讯,无协议Modbus通讯,读
- STM32F103主控的4-20mA采集电路与RS485输出设计:原理图、PCB源文件及ADC采样与RS485通信源码全包含,4-20mA采集电路,主控为STM32F103,RS485输出 提供原理
- 电力市场节点出清电价详解:适合初入电力市场者,附带程序备注与参考文献解读,电力市场节点出清电价 程序备注清晰 适合刚刚接触电力市场的同学 部分参考文献《机组运行约束对机组节点边际电价的影响分析》
- 电力市场两阶段投标策略:基于闵可夫斯基加法的充电站投标模型与实时可调度潜力评估,两阶段市场投标策略 电力市场程序 提出了日前电力市场和实时电力市场下充电站的投标策 略 ,基于闵可夫斯基加
- SpringBoot实现博客管理系统
- 模块化多电平变换器(MMC)仿真研究:逼近调制与环流抑制策略及双闭环解耦控制揭秘,模块化多电平变器(MMC)matlab仿真 最近电平逼近调制-载波层叠-载波移相调制 二倍频负序环流抑制 子模块电容电
- Docker rootless模式运行容器
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
评论1