/**
******************************************************************************
* @file stm32f10x_tim.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the TIM firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_tim.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup TIM
* @brief TIM driver modules
* @{
*/
/** @defgroup TIM_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Defines
* @{
*/
/* ---------------------- TIM registers bit mask ------------------------ */
#define SMCR_ETR_Mask ((uint16_t)0x00FF)
#define CCMR_Offset ((uint16_t)0x0018)
#define CCER_CCE_Set ((uint16_t)0x0001)
#define CCER_CCNE_Set ((uint16_t)0x0004)
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Functions
* @{
*/
/**
* @brief Deinitializes the TIMx peripheral registers to their default reset values.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @retval None
*/
void TIM_DeInit(TIM_TypeDef* TIMx)
{
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
if (TIMx == TIM1)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
}
else if (TIMx == TIM2)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
}
else if (TIMx == TIM3)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
}
else if (TIMx == TIM4)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
}
else if (TIMx == TIM5)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
}
else if (TIMx == TIM6)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
}
else if (TIMx == TIM7)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
}
else if (TIMx == TIM8)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
}
else if (TIMx == TIM9)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
}
else if (TIMx == TIM10)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
}
else if (TIMx == TIM11)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
}
else if (TIMx == TIM12)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
}
else if (TIMx == TIM13)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
}
else if (TIMx == TIM14)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
}
else if (TIMx == TIM15)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
}
else if (TIMx == TIM16)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
}
else
{
if (TIMx == TIM17)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
}
}
}
/**
* @brief Initializes the TIMx Time Base Unit peripheral according to
* the specified parameters in the TIM_TimeBaseInitStruct.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
* structure that contains the configuration information for the
* specified TIM peripheral.
* @retval None
*/
void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
{
uint16_t tmpcr1 = 0;
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
tmpcr1 = TIMx->CR1;
if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
(TIMx == TIM4) || (TIMx == TIM5))
{
/* Select the Counter Mode */
tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
}
if((TIMx != TIM6) && (TIMx != TIM7))
{
/* Set the clock division */
tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
}
TIMx->CR1 = tmpcr1;
/* Set the Autoreload value */
TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
/* Set the Prescaler value */
TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
{
/* Set the Repetition Counter value */
TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
}
/* Generate an update event to reload the Prescaler and the Repetition counter
values immediately */
TIMx->EGR = TIM_PSCReloadMode_Immediate;
}
/**
* @brief Initializes the TIMx Channel1 according to the specified
* parameters in the TIM_OCInitStruct.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_OCInitStru
EMWIN实验1 STemWin无操作系统移植.zip_AD7606_STemwin_emwin6.1_emwin系统移植_pi （534个子文件） 
Template.uvgui.Administrator 137KB MALLOC.uvgui.Administrator 72KB Template.uvguix.Administrator 70KB MALLOC.axf 1.31MB keilkilll.bat 399B stm32f10x_tim.c 107KB ILI93xx.c 83KB sdio_sdcard.c 61KB stm32f10x_flash.c 61KB stm32f10x_rcc.c 50KB stm32f10x_adc.c 46KB stm32f10x_i2c.c 45KB stm32f10x_can.c 44KB stm32f10x_usart.c 37KB system_stm32f10x.c 36KB stm32f10x_fsmc.c 35KB usb_core.c 31KB stm32f10x_spi.c 30KB GUIDRV_Template.c 29KB stm32f10x_dma.c 29KB usb_regs.c 29KB stm32f10x_sdio.c 28KB stm32f10x_gpio.c 23KB stm32f10x_dac.c 19KB Queue.c 17KB core_cm3.c 17KB usmart.c 15KB touch.c 14KB usb_prop.c 14KB ad7606.c 12KB Main winDLG.c 12KB stm32f10x_cec.c 11KB usmart_str.c 11KB hw_config.c 10KB usb_pwr.c 9KB Parameter SettingsDLG.c 9KB flash.c 9KB w25qxx.c 9KB storageDLG.c 9KB FramewinDLG.c 9KB stm32f10x_pwr.c 9KB LCDConf_Lin_Template.c 8KB stm32f10x_rtc.c 8KB stm32f10x_bkp.c 8KB delay.c 8KB playbackDLG.c 8KB playbackpage2DLG.c 7KB usb_desc.c 7KB gt9147.c 7KB misc.c 7KB stm32f10x_exti.c 7KB usb_istr.c 7KB usb_int.c 6KB GUI_X_FreeRTOS.c 6KB stm32f10x_wwdg.c 6KB MwimDLG.c 5KB malloc.c 5KB usart.c 5KB stm32f10x_dbgmcu.c 5KB stm32f10x_iwdg.c 5KB usb_endp.c 5KB GUI_X.c 5KB ft5206.c 4KB usb_sil.c 4KB ott2001a.c 4KB usb_mem.c 4KB sram.c 4KB 24cxx.c 3KB LCDConf_FlexColor_Template.c 3KB Page1DLG.c 3KB stm32f10x_crc.c 3KB usb_init.c 3KB spi.c 3KB exti.c 3KB ctiic.c 3KB myiic.c 3KB timer.c 3KB Page2DLG.c 3KB GUI_X_Touch_Analog.c 3KB main.c 3KB usb_it.c 3KB stm32f10x_it.c 2KB usmart_config.c 2KB key.c 2KB led.c 1KB GUIConf.c 1KB GUIDEMO.c 879B sys.c 878B Library.cpp 9KB main.crf 695KB guidemo.crf 642KB guidrv_template.crf 466KB lcdconf_flexcolor_template.crf 432KB gui_x_touch_analog.crf 431KB timer.crf 419KB guiconf.crf 414KB main windlg.crf 356KB parameter settingsdlg.crf 355KB storagedlg.crf 355KB playbackpage2dlg.crf 355KB共 534 条
- 1
- 2
- 3
- 4
- 5
- 6
资源评论
JaniceLu
- 粉丝: 99
- 资源: 1万+
最新资源
- gps追踪器源码和pcb资料，量产资料，可以直接生产用
- flash spi w25q128 w25q64 w25q32 w25q16 verilog fpga程序代码 fpga w25q128 64 32 16 verilog代码 资料包清单： 1.w2
- 全国计算机等级考试《三级数据库技术》复习核心内容讲解与备考指导
- 弯管机程序使用三菱FX系列 PLC和昆仑通态触摸屏，也可以用三菱F940系列触摸屏
- 信捷PLC上位机源代码例子，modbusTCP通信，通俗易懂，C#源代码
- 关于粒子滤波在电力负荷预测中的应用 python源代码，代码按照高水平文章复现，有详细说明，保证正确 在线预测电力负荷，在贝叶斯框架的动态模型 提供了顺序蒙特卡罗方法的回顾，并提供了所谓的粒子过滤
- 能源价格风险管理matlab源代码，代码按照高水平文章复现，保证正确 电力价格的波动性远远大于其他通常以极端波动著称的价格 由于电力不能经济地储存，终端用户的需求在很大程度上取决于天气，而电网的可靠
- 电力市场中生产者的战略招标：一种凸松弛方法matlab 源代码，代码按照高水平文章复现，保证正确 电力市场中的战略投标问题在电力系统中得到了广泛研究，通常是通过制定难以解决的复杂的双层优化问题来进行的
- FMC ADC12D2000RF 模块，忍痛出射频直接采集FMC ADC模块，模块基于Ti公司高端ADC12D2000RF芯片，芯片为单通道4GSPS，双通道2GSPS，12bit分辨率，这款芯片国
- 西门子200smart与施耐德ATV变频器modbus通讯 西门子s7-200smart与施耐德ATV12变频器通讯，可靠稳定，同时解决施耐德ATV变频器断电重启后，自准备工作，无需人为准备 器件：
- 2025/1/15 自用
- siddhi 的核心jar
- 上市公司的高压软启动控制源码，源码，需要的联系，平台TI，厂家见图，也有低压软起动的方案，
- 基于Atrix7 Kitex7 Vertex7系列FPGA的DDR3内存驱动器代码（Verilog语言），把2GB的内存做成一个可以同时读写的大型FIFO 有代码，有测试文档
- 圈乘问题求解问题pdf
- 关于配电网调压通信的需求VoltVAR反馈控制法则的比较完全分散与网络化策略 matlab源代码 代码按照高水平文章复现，保证正确 我们首先介绍了一类非常普遍的纯局部控制策略，并通过一个反例演示
资源上传下载、课程学习等过程中有任何疑问或建议，欢迎提出宝贵意见哦~我们会及时处理！
点击此处反馈
