xilinx_pci.rar_PCI xilinx_Xilinx_xilinx pci

/* * PCI support for Xilinx plbv46_pci soft-core which can be used on * Xilinx Virtex ML410 / ML510 boards. */ #include <linux/ioport.h> #include <linux/of.h> #include <linux/pci.h> #include <mm/mmu_decl.h> #include <asm/io.h> #include <asm/xilinx_pci.h> #define XPLB_PCI_ADDR 0x10c #define XPLB_PCI_DATA 0x110 #define XPLB_PCI_BUS 0x114 #define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY static struct of_device_id xilinx_pci_match[] = { { .compatible = "xlnx,plbv46-pci-1.03.a", }, {} }; /** * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration. */ static void xilinx_pci_fixup_bridge(struct pci_dev *dev) { struct pci_controller *hose; int i; if (dev->devfn || dev->bus->self) return; hose = pci_bus_to_host(dev->bus); if (!hose) return; if (!of_match_node(xilinx_pci_match, hose->dn)) return; /* Hide the PCI host BARs from the kernel as their content doesn't * fit well in the resource management */ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; dev->resource[i].flags = 0; } dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n", pci_name(dev)); } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge); /** * xilinx_pci_exclude_device - Don't do config access for non-root bus * * This is a hack. Config access to any bus other than bus 0 does not * currently work on the ML510 so we prevent it here. */ static int xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn) { return (bus != 0); } /** * xilinx_pci_init - Find and register a Xilinx PCI host bridge */ void __init xilinx_pci_init(void) { struct pci_controller *hose; struct resource r; void __iomem *pci_reg; struct device_node *pci_node; pci_node = of_find_matching_node(NULL, xilinx_pci_match); if(!pci_node) return; if (of_address_to_resource(pci_node, 0, &r)) { pr_err("xilinx-pci: cannot resolve base address\n"); return; } hose = pcibios_alloc_controller(pci_node); if (!hose) { pr_err("xilinx-pci: pcibios_alloc_controller() failed\n"); return; } /* Setup config space */ setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR, r.start + XPLB_PCI_DATA, PPC_INDIRECT_TYPE_SET_CFG_TYPE); /* According to the xilinx plbv46_pci documentation the soft-core starts * a self-init when the bus master enable bit is set. Without this bit * set the pci bus can't be scanned. */ early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD); /* Set the max latency timer to 255 */ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff); /* Set the max bus number to 255 */ pci_reg = of_iomap(pci_node, 0); out_8(pci_reg + XPLB_PCI_BUS, 0xff); iounmap(pci_reg); /* Nothing past the root bridge is working right now. By default * exclude config access to anything except bus 0 */ if (!ppc_md.pci_exclude_device) ppc_md.pci_exclude_device = xilinx_pci_exclude_device; /* Register the host bridge with the linux kernel! */ pci_process_bridge_OF_ranges(hose, pci_node, 1); pr_info("xilinx-pci: Registered PCI host bridge\n"); }