KASPERSKY LAB END USER LICENSE AGREEMENT
IMPORTANT LEGAL NOTICE TO ALL USERS: CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT BEFORE YOU START USING THE SOFTWARE.
BY USING THE SOFTWARE YOU CONSENT TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THIS SOFTWARE AND DELETE THE SOFTWARE.
1. Definitions
1.1. Software means software and related materials.
1.2. Rightholder (owner of all rights, whether exclusive or otherwise to the Software) means AO Kaspersky Lab, a company incorporated according to the laws of the Russian Federation.
1.3. Computer(s) means hardware(s), including servers, personal computers, laptops, workstations, personal digital assistants, ‘smart phones’, hand-held devices, or other electronic devices for which the Software was designed where the Software will be installed and/or used.
1.4. End User (You/Your) means individual(s) installing or using the Software on his or her own behalf or who is legally using a copy of the Software; or, if the Software is being downloaded or installed on behalf of an organization, such as an employer. “You” further means the organization for which the Software is downloaded or installed and it is represented hereby that such organization has authorized the person accepting this agreement to do so on its behalf. For purposes hereof the term “organization,” without limitation, includes any partnership, limited liability company, corporation, association, joint stock company, trust, joint venture, labor organization, unincorporated organization, or governmental authority.
1.5. Update(s) means all upgrades, revisions, patches, enhancements, fixes, modifications, copies, additions or maintenance packs etc.
1.6. User Manual means user manual, administrator guide, reference book and related explanatory or other materials.
1.7. Technical Support web-site: http://support.kaspersky.com
2. Grant of License
2.1. The Rightholder hereby grants You a non-exclusive license to store, load, install, execute, and display (to “use”) the free of charge Software within the scope of functionality set forth in the User Manual or the Technical Support web-site, according to the terms and conditions of this Agreement (the “License”) and you accept this License.
2.2. You have the right to make a copy of the Software solely for back-up purposes and only to replace the legally owned copy if such copy is lost, destroyed or becomes unusable. This back-up copy cannot be used for other purposes and must be destroyed when you lose the right to use the Software or when Your license expires or is terminated for any other reason according to the legislation in force in the country of your principal residence or in the country where You are using the Software.
3. Term and termination
3.1. The Software can be used perpetually.
3.2. Without prejudice to any other remedy in law or in equity that the Rightholder may have, in the event of any breach by You of any of the terms and conditions of this Agreement, the Rightholder shall at any time without notice to You be entitled to terminate this License.
4. Technical Support
4.1. No Technical Support is provided.
5. Limitations
5.1. You shall not emulate, clone, rent, lend, lease, sell, modify, decompile, or reverse engineer the Software or disassemble or create derivative works based on the Software or any portion thereof with the sole exception of a non-waivable right granted to You by applicable legislation, and you shall not otherwise reduce any part of the Software to human readable form or transfer the licensed Software, or any subset of the licensed Software, nor permit any third party to do so, except to the extent the foregoing restriction is expressly prohibited by applicable law. Neither Software’s binary code nor source code may be used or reverse engineered to re-create the program algorithm, which is proprietary. All rights not expressly granted herein are reserved by Rightholder and/or its suppliers, as applicable. Any such unauthorized use of the Software shall result in immediate and automatic termination of this Agreement and the License granted hereunder and may result in criminal and/or civil prosecution against You.
5.2. You shall not transfer the rights to use the Software to any third party except.
5.3. You shall not rent, lease or lend the Software to any third party.
5.4. You shall not use the Software in the creation of data or software used for detection, blocking or treating threats described in the User Manual.
6. Limited Warranty and Disclaimer
6.1. The Rightholder makes no guarantees that the Software is functionally operative.
6.2. THE SOFTWARE IS PROVIDED "AS IS" AND THE RIGHTHOLDER MAKES NO REPRESENTATION AND GIVES NO WARRANTY AS TO ITS USE OR PERFORMANCE. EXCEPT FOR ANY WARRANTY, CONDITION, REPRESENTATION OR TERM THE EXTENT TO WHICH CANNOT BE EXCLUDED OR LIMITED BY APPLICABLE LAW THE RIGHTHOLDER AND ITS PARTNERS MAKE NO WARRANTY, CONDITION, REPRESENTATION, OR TERM (EXPRESSED OR IMPLIED, WHETHER BY STATUTE, COMMON LAW, CUSTOM, USAGE OR OTHERWISE) AS TO ANY MATTER INCLUDING, WITHOUT LIMITATION, NONINFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY, SATISFACTORY QUALITY, INTEGRATION, OR APPLICABILITY FOR A PARTICULAR PURPOSE. YOU ASSUME ALL FAULTS, AND THE ENTIRE RISK AS TO PERFORMANCE AND RESPONSIBILITY FOR SELECTING THE SOFTWARE, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE. WITHOUT LIMITING THE FOREGOING PROVISIONS, THE RIGHTHOLDER MAKES NO REPRESENTATION AND GIVES NO WARRANTY THAT THE SOFTWARE WILL BE ERROR-FREE OR FREE FROM INTERRUPTIONS OR OTHER FAILURES OR THAT THE SOFTWARE WILL MEET ANY OR ALL YOUR REQUIREMENTS WHETHER OR NOT DISCLOSED TO THE RIGHTHOLDER.
7. Exclusion and Limitation of Liability
7.1. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE RIGHTHOLDER OR ITS PARTNERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR LOSS OF PRIVACY, FOR CORRUPTION, DAMAGE AND LOSS OF DATA OR PROGRAMS, FOR FAILURE TO MEET ANY DUTY INCLUDING ANY STATUTORY DUTY, DUTY OF GOOD FAITH OR DUTY OF REASONABLE CARE, FOR NEGLIGENCE, FOR ECONOMIC LOSS, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES, INFORMATON, SOFTWARE AND RELATED CONTENT THROUGH THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, OR ARISING OUT OF ANY BREACH OF CONTRACT OR ANY TORT (INCLUDING NEGLIGENCE, MISREPRESENTATION, ANY STRICT LIABILITY OBLIGATION OR DUTY), OR ANY BREACH OF STATUTORY DUTY, OR ANY BREACH OF WARRANTY OF THE RIGHTHOLDER OR ANY OF ITS PARTNERS, EVEN IF THE RIGHTHOLDER OR ANY PARTNER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
7.2. IN THE EVENT ANY DISCLAIMER, EXCLUSION OR LIMITATION IN THIS AGREEMENT CANNOT BE EXLUDED OR LIMITED ACCORDING TO APPLICABLE LAW THEN ONLY SUCH DISCLAIMER, EXCLUSION OR LIMITATION SHALL NOT APPLY TO YOU AND YOU CONTINUE TO BE BOUND BY ALL THE REMAINING DISCLAIMERS, EXCLUSIONS AND LIMITATIONS.
8. GNU and Other Third-Party Licenses
8.1. The Software may include some software programs that are licensed (or sublicensed) to the user under the GNU General Public License (GPL) or other similar free software licenses which, among other rights, permit the user to copy, modify and redistribute certain programs, or portions thereof, and have access to the source code "Open-Source Software"). If such licenses require that for any software, which is distributed to someone in an executable binary format, that the source cod
wjp_qq
- 粉丝: 1
- 资源: 31
最新资源
- 多微网优化模型matlab 采用粒子群算法分析两个微网的优化调度,得到蓄电池,发电机以及微网间功率传输,程序有参考资料
- 潮流计算程序matlab 牛拉法 采用matlab对9节点进行潮流计算,采用牛拉法,程序运行可靠
- 微网优化调度matlab 采用matlab+yalmip编制含分布式和储能的微网优化模型,程序采用15分钟为采集节点,利用cplex求解,程序考虑发电机的启停约束,程序运行可靠
- PMSM永磁同步电机仿真三电平SVPWM矢量控制matlab PMSM双环矢量控制传统三电平
- 路径规划人工势场法以及改进人工势场法matlab代码,包含了
- MobaXterm 是一款功能强大且实用的终端仿真器软件.docx
- 三菱FX3U底层源码,PLSR源码 总体功能和指令可能支持在RUN中下载程序,支持注释的写入和读取,支持脉冲输出与定位指令(包括PLSY PWM PLSR PLSV DRVI DRVA 等指令
- Oracle Database Gateways for Win32-11gR2
- python071基于RSA加密算法软件的研究设计
- 成熟量产低压无刷伺服驱动 方案 全套软硬件资料 源码 原理图 需要的直接拿 基于28035平台
- 欧姆龙PLC ST语言6轴伺服RS232C通讯板CP1W-C IF0 真实项目程序,ST语言写的FB块 PLC用是两台CP1H-X40DT-D配置4块RS232C通讯板CP1W-CIF01 触摸屏是N
- 欧姆龙CP1H与力士乐VFC-x610变频器通讯程序功能:原创程序,可直接用于现场程序 欧姆龙CP1H的CIF11通讯板,实现对力士乐VFC-x610变频器 设定频率,控制正反转,读取实际频率,读取
- 级联型电力电子变压器,高压直流MMC控制系统,级联数可选,调 制方式有移相载波,nlm及混合调制,拥有冒泡排序,递归排序等方法,可控制三相不平衡与环流
- 西门子PLC双轴定位算法电池焊接控制程序-S7-1200 +威纶通触摸屏 S7-1200PLC做的电池焊接程序,电池包里面有n*m行列个电池 程序设计灵活SCL语言+梯形图,采用了位置试教与定位路径规
- 变压器副边突然短路simulink仿真
- MATLAB代码:基于模型预测控制的楼宇负荷需求响应研究 关键词:楼宇负荷 空调 模型预测控制 需求响应 仿真平台:MATLAB+CVX平台 主要内容:代码主要做的是一个建筑楼宇的需求响应问题,首
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈