DAUD updates for H12-13

docs/control/extensions/README.md

@@ -117,8 +117,8 @@ Note: the scripting has had a significant update in the March '23 firmware. See
 - **BITH=3** - set the compression in Mb/s for the H264 encodes. Normally this would be for LRVs at around 4Mb/s. No guaranteed capture reliability using this feature. Input range in Mb/s from 1 to 100. 
 - **BITR=120** - set the compression in Mb/s for the Protune High Bitrate setting (HEVC only). Normally this would be around 100Mb/s, however higher (or lower) rates may be achieved with newer SD Cards. No guaranteed capture reliability using this feature. Input range in Mb/s from 2 to 200. Counterintuitively, lower frame rates like 24/25/30fps can use higher bitrates than faster frame rates.  e.g. A camera that is reliable doing 180Mb/s at 24fps, will likely need to drop to 150Mb/s for 120fps. Most GP2 cameras can do 150Mb/s for all video modes, but your testing is still required. Use at your own risk.
 - **DAMP=0.1 to 1000** - Control over the auto-exposure damping. When moving a camera through dramatically changing lighting, like biking through a forest, in and out of sunlight, or flying a drone through a short tunnel, the exposure will adjust automatically, correctly in most scenarios, but sometimes not optimal for some rapidly changing light levels. The camera's auto-exposure currently takes about one second to adjust from sunlight to indoor conditions, but if you are flying a drone through indoors for only a few seconds, the camera would over-expose on exit. In this scenario using an exposure lock might be preferable, maintaining an outdoor exposure throwout, but exposure lock is risky for shooting under variable lighting conditions. Changing the damping might be what you need. Setting the DAMP=1 is the default, so setting to 10 would slow the camera's exposure adjustments 10X. Now shooting into dark for moment will not cause much over-exposure (if any).  Setting DAMP=60 will take a minute for exposure changes. Setting DAMP lower than 1, like 0.2, would make it adjust faster. There is no perfect setting, this is just more control.
-- **DAUD=1** - Disable audio, all video created video files will have no audio. Application: high bit-rate drones video. (not supported on HERO12)
-- **DLRV=1** - Disable LRV, all videos will have an MP4 only. This is not good idea for Quik uses, as the LRV video helps in video preview. Note: There is currently a bug in this feature (HERO10 as requires a restart after two captures.) (not supported on H12)
+- **DAUD=1** - Disable audio, all video created video files will have no audio. Application: high bit-rate drones video.
+- **DLRV=1** - Disable LRV, all videos will have an MP4 only. This is not good idea for Quik uses, as the LRV video helps in video preview. Note: There is currently a bug in this feature (HERO10 as requires a restart after two captures.) (not supported on H12-13)
 - **EVBS=x** Global EV comp bias for all video modes that also works with Live-Stream and web-cam, and can be changed during capture if QRDR=1 is set. As this is global offset, it will add to EV comp settings with your presets.  So if EVBS=-1 and a preset has EV set to -0.5, the effective EV will be -1.5.
 - **FAST=1** For fewer Labs notifications on boot. Useful for any script that repeats after a shutdown, and the script will run sooner, and reducting battery consumption.
 - **FONT=1** Select the old fonts (if you only want the dot matrix font)

docs/control/tech/README.md

@@ -357,7 +357,7 @@ The above global metadata can be extracted with this [**demo web tool**](../meta
 * **BYPS** "H11-13: Bypass common pop-ups, such as resetting the time and date. Remember to set time and date if you remove the battery. Input Data: 1 to bypass, 0 for normal notifications",
 * **CBAR** H9-13: enable a small 75% saturated color bars for video tools evaluation. Most cameras limit overlays to 4K30, 2.7Kp60 or lower. Input Data: 1 to enable, 0 to disable",
 * **DAMP** H10-13: Control over the auto-exposure damping. Setting the DAMP to 1 is the default, setting to 10 would slow the camera’s exposure adjustments 10X.Input Data: 0.1 to 10000",
-* **DAUD** H10-11/13: Disable Audio in video captures, all MP4 files will have no audio track. Application: high bit-rate drones video.Input Data: 1 to disable audio, 0 to re-enable",
+* **DAUD** H10-13: Disable Audio in video captures, all MP4 files will have no audio track. Application: high bit-rate drones video.Input Data: 1 to disable audio, 0 to re-enable",
 * **DLRV** H10-11: Disable LRV file creation. Application: high bit-rate drones video. Input Data: 1 to disable LRVs, 0 to re-enable",
 * **DSPC** Labs text display contrast:  Set the background opacity for Labs text on the LCD. Input Data: Number from 0-transparent to 6-completely opaque.",
 * **DSPL** Labs text display length: How long to display each Labs message, like owner information (OWNR). The default is 1 second. Input Data: Number from 1-9 seconds or 10-9999 milliseconds.",