CEN - CEN/TC 155

About CEN

The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.

CEN Communities Technical Work Structure and Governance
CEN Technical Bodies CEN Standards Evolution and Forecast

CEN/TC 155

 - 

Plastics piping systems and ducting systems
 
En FrDe
  •  
export to xls file

CEN/TC 155 Work programme

sort up 
Project reference
sort upsort down
Status
Initial Date
Current Stage
Next Stage
Forecasted voting date
EN ISO 15493:2003/FprA11 (WI=00155929)
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
Under Approval2019-04-012022-07-142022-08-162022-02-10
FprCEN/TS 12201-7 (WI=00155A1C)
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 7: Assessment of conformity
Approved2023-11-142024-09-232024-10-21 
FprCEN/TS 14758-2 (WI=00155981)
Plastics piping systems for non‐pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP‐MD) - Part 2: Assessment of conformity
Under Approval2022-06-222024-12-192025-03-13 
FprCEN/TS 15223 (WI=00155978)
Plastic piping systems - Structural design of buried thermoplastics piping systems - Procedure and guidance under various conditions of loading
Under Approval2021-11-032024-02-222025-02-27 
FprCEN/TS 17152-4 (WI=00155A1X)
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 4: Guidance for structural design of modular systems
Under Approval2024-08-052024-11-222025-01-30 
FprEN 12100 (WI=00155A0R)
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
Under Approval2023-01-202024-12-262025-01-272024-08-21
FprEN 12106 (WI=00155A1D)
Plastics piping systems - Polyethylene (PE), crosslinked polyethylene (PE-X) and unplasticized polyamide (PA-U) pipes - Test method for the resistance to internal pressure after application of squeeze-off
Under Approval2023-11-202024-11-142025-01-162024-11-14
FprEN 1680 (WI=00155A0S)
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
Under Approval2022-11-172024-12-262025-01-272024-08-21
FprEN 1705 (WI=00155A1A)
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
Under Approval2023-08-162024-11-142025-01-162024-11-14
prCEN ISO/TS 23818-1 rev (WI=00155A1N)
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 1: Polyethylene (PE) material
Under Drafting2024-03-062024-03-062024-09-06 
prCEN ISO/TS 23818-2 rev (WI=00155A1R)
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 2: Thermoset composite materials
Under Drafting2024-06-142024-06-142024-12-16 
prCEN ISO/TS 23818-3 rev (WI=00155A1O)
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material
Under Drafting2024-03-062024-03-062024-09-06 
prCEN/TS 1329-2 rev (WI=00155A1F)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
Under Drafting2024-02-192024-02-192024-08-15 
prCEN/TS 13476-4 rev (WI=00155A13)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of Conformity
Under Drafting2024-10-092024-10-092025-04-09 
prCEN/TS 1401-2 rev (WI=00155A1T)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
Under Approval2024-07-082025-01-132025-04-03 
prCEN/TS 1451-2 rev (WI=00155A18)
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Assessment of conformity
Preliminary 2023-09-28  
prCEN/TS 1852-2 rev (WI=00155A1U)
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
Under Approval2024-07-082025-01-132025-04-03 
prEN 12666-1 (WI=00155A1E)
Plastics piping systems for non-pressure underground drains and sewers - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
Under Approval2023-10-122024-09-252024-12-192025-07-24
prEN 1329-1 (WI=00155A1I)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
Under Approval2024-02-202024-10-172025-12-022025-12-02
prEN 13476-1 (WI=00155A10)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics
Under Approval2023-05-272024-05-092025-03-082025-03-08
prEN 13476-2 (WI=00155A11)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
Under Approval2023-06-272024-05-092025-04-082025-04-08
prEN 13476-3 (WI=00155A12)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
Under Approval2023-06-272024-05-092025-04-082025-04-08
prEN 13598-1 rev (WI=00155A22)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
Preliminary 2024-10-01  
prEN 13598-2 rev (WI=00155A23)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
Preliminary 2024-10-01  
prEN 1451-1 rev (WI=00155A19)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
Preliminary 2023-09-28 2025-07-14
prEN 1453-1 rev (WI=00155999)
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
Preliminary 2021-11-16 2023-08-28
prEN 14541-1 rev (WI=00155A27)
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
Preliminary 2025-01-09 2027-04-20
prEN 15383 (WI=00155A1H)
Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers
Under Approval2024-02-202024-11-132025-01-162025-12-02
prEN 1555-1 (WI=00155A0U)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
Under Approval2023-05-012024-08-292025-02-102025-02-10
prEN 1555-2 (WI=00155A0V)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
Under Approval2023-05-012024-08-292025-02-102025-02-10
prEN 1555-3 (WI=00155A0T)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
Under Approval2023-05-012024-08-292025-02-102025-02-10
prEN 1555-4 (WI=00155A0W)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
Under Approval2023-05-012024-08-292025-02-102025-02-10
prEN 16000 rev (WI=00155A1Z)
Plastics piping systems - Systems within the building structure - Mounting and fixing of components in the test apparatus to thermal attack by a single burning item
Preliminary 2024-08-14 2026-06-17
prEN 16903 (WI=00155A0K)
Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804
Under Approval2022-11-162024-06-202025-05-282025-05-28
prEN 16904 (WI=00155A0L)
Plastics piping systems inside the building structure - Environmental product declarations - Product category rules complementary to EN 15804
Under Approval2022-11-162024-06-202025-05-282025-05-28
prEN ISO 10928 (WI=00155A1Y)
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use (ISO 10928:2024)
Under Enquiry2024-08-132024-10-312025-01-232026-05-19
prEN ISO 11295 rev (WI=00155A1M)
Plastics piping systems used for the rehabilitation of pipelines — Classification and overview of strategic, tactical and operational activities
Under Drafting2024-03-062024-03-062024-09-062026-04-14
prEN ISO 11300-1 (WI=00155A1K)
Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 1: Polyethylene (PE) material (ISO/DIS 11300-1:2025)
Under Enquiry2024-03-022025-01-092025-03-282025-11-28
prEN ISO 11300-2 (WI=00155A1P)
Piping systems for rehabilitation of underground drains, sewers and water supply networks-Part 2: Thermoset composite materials (ISO/DIS 11300-2:2025)
Under Enquiry2024-03-222025-01-092025-03-312025-12-01
prEN ISO 11300-3 (WI=00155A1L)
Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material (ISO/DIS 11300-3:2025)
Under Enquiry2024-03-022025-01-092025-03-282025-11-28
prEN ISO 11300-4 (WI=00155A1S)
Piping systems for rehabilitation of underground drainage, sewerage and water supply networks — Part 4: Thermoplastic composite materials
Under Drafting2024-03-232024-03-232024-09-232026-05-04
prEN ISO 11301-1 rev (WI=00155A16)
Piping systems for rehabilitation of underground gas supply networks — Part 1: Polyethylene (PE) material
Under Approval2023-08-032025-01-14 2026-01-19
prEN ISO 13760 rev (WI=00155A24)
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
Under Drafting2024-10-262024-10-262025-04-282026-12-07
prEN ISO 15494 rev (WI=00155A0Y)
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
Under Drafting2023-06-102023-06-102023-12-112025-07-22
prEN ISO 15875-1 (WI=00155A08)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO/DIS 15875-1:2024)
Under Approval2022-05-272024-10-152025-06-162025-06-16
prEN ISO 15875-2 (WI=00155A09)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO/DIS 15875-2:2024)
Under Approval2022-05-272024-10-162025-06-162025-06-16
prEN ISO 15875-3 (WI=00155A0B)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO/DIS 15875-3:2024)
Under Approval2022-06-072024-10-172025-06-172025-06-17
prEN ISO 15875-5 (WI=00155A0A)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO/DIS 15875-5:2024)
Under Approval2022-05-272024-10-172025-06-172025-06-17
prEN ISO 16486-4 (WI=00155A17)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves (ISO/DIS 16486-4:2024)
Under Approval2023-09-122025-01-082025-04-162025-01-08
prEN ISO 18984 (WI=00155A0X)
Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO/DIS 18984:2024)
Under Approval2023-06-062024-04-242024-12-242024-12-24
prEN ISO 2507 rev (WI=00155A1G)
Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) Pipes and Fittings
Under Approval2024-02-162025-01-14 2026-01-20
(WI=00155A1W)
Plastics piping systems for non-pressure underground drains and sewers for transport, infiltration and exfiltration of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) —Specification for pipes, fittings and the system.
Preliminary 2024-07-29 2026-05-14
(WI=00155A1V)
Thermoplastics piping systems — Test methods for the determination of barrier properties of PE piping systems for the transport of water in contaminated soils— Part 1: Permeation of model substances through plastic barrier layers of PE pipes
Preliminary 2024-07-29  
(WI=00155A20)
Plastics piping systems – Guidance how to use the characteristics MFR and OIT tests and to interpret the results in product standards for pipes and fittings
Preliminary 2024-09-02  
(WI=00155A26)
Plastics piping systems for non-pressure underground drainage and sewerage - Durability test method for products
Preliminary 2024-12-16 2026-10-28
(WI=00155A21)
Plastics piping systems for non-pressure underground drains and sewers – General requirements for pipes, fittings and the system
Preliminary 2024-09-12 2026-07-14
(WI=00155A25)
Plastics piping systems for non-pressure underground conveyance and storage of surface water — Boxes used for infiltration, attenuation and storage systems — Creep test
Under Drafting2024-11-292024-11-292025-03-282026-09-11
 

Our use of cookies

We use necessary cookies to make our site work.

Necessary cookies enable core functionality such as security, network management, and accessibility. You may disable these by changing your browser settings, but this may affect how the website functions.