Sculpture LFO overview in Logic Pro
Sculpture offers two multiwaveform LFOs. Both can be used either polyphonically, monophonically, or somewhere in-between.
If used monophonically, the modulation is identical for all voices. Imagine a scenario where a chord is played on the keyboard. If LFO 2 is used to modulate pitch, for example, the pitch of all voices in the played chord rise and fall synchronously. This is known as a phase-locked modulation.
In the same scenario, if LFO 2 is used polyphonically—to modulate multiple voices—they are not phase-locked.
If a random (in-between) value is used, some notes are modulated synchronously, and others are not modulated synchronously.
Furthermore, both LFOs are key-synced: Each time you play a key, the LFO modulation of this voice is started from 0.
To understand the non-phase-locked characteristic more easily, imagine a situation where a chord is played on the keyboard. If LFO 2 is used to modulate pitch, for example, the pitch of one voice might rise, the pitch of another voice might fall, and the pitch of a third voice might reach its minimum value. As you can see from this example, the modulation is independent for each voice, or note.
The key sync feature ensures that the LFO waveform cycle always starts from 0, which results in consistent modulation of each voice. If the LFO waveform cycles were not synchronized in this way, individual note modulations would be uneven.
Both LFOs can also be faded in or out automatically, courtesy of built-in envelope generators.
LFO parameters
Waveform pop-up menu: Choose the waveform used for LFO modulation. See Sculpture LFO waveforms.
Waveform display: Shows the results of changes to the Waveform pop-up menu and Curve knob parameter settings.
Curve knob: Change the shape of modulation waveforms. A pure waveform of the chosen type is active at a value of 0.0. The +1 and −1 positions deform the wave. For example, with a sine wave chosen as the LFO waveform type:
Curve value of 0.0: Wave is sine-shaped.
Curve values above 0.0: Wave is smoothly changed into a nearly rectangular wave.
Curve values below 0.0: The slope at the zero crossing is reduced, resulting in shorter soft pulses to +1 and −1.
Rate knob and field: Set the rate of LFO modulation. This is either a freely definable Hz value (when the Free button is active), or a rhythmic value (when the Sync button is active). When synchronized with the project tempo, available rates range from 1/64 notes to a periodic duration of 32 bars. Triplet and punctuated values are also accessible.
Sync/Free buttons: Choose either synchronized or free-running LFO rates. These buttons interact with the Rate knob. The synchronized value is derived from the Logic Pro tempo and meter.
Envelope knob: Set the time it takes for the LFO modulation to fade in or fade out. See Modulate Sculpture LFOs.
Phase knob: Choose between monophonic or polyphonic LFO modulations. These can have similar phases, completely random phase relationships, key-synced phases, or anything in-between.
Tip: If you move the Phase knob slightly away from the mono position, you get nonlocked modulations for all voices running at similar, but not identical, phases. This is ideal for string-section vibratos.
RateMod Source pop-up menu: Choose a modulation source for the LFO Rate parameter.
RateMod Amount slider: Set the intensity—the amount—of LFO rate modulation.
Logic Pro User Guide: Apple Books | PDF
Logic Pro Instruments: Apple Books | PDF
Logic Pro Effects: Apple Books | PDF