iPhone 16 Pro Max Bottom Speaker
Before You Begin
Warning
Read Battery Safety and follow workspace and battery handling guidelines before you begin.
Remove the following parts before you begin:
Tools
Torque driver (green, 0.45 kgf cm) (923-00105)
Torque driver (orange, 0.85 kgf cm) (923-08131)
Torque driver (teal, 0.75 kgf cm) (923-08085)
JCIS bit for fixed driver (923-0246)
Super screw bit (923-02066)
Micro stix bit (923-01290)
Nylon probe (black stick) (922-5065)
ESD-safe tweezers
Refer to a full list of tools required for all repairs.
Caution
Avoid touching the grounding springs on and near the bottom speaker.
Removal
Use a torque driver and the JCIS bit to remove the two crosshead screws from the bottom speaker (1). Set aside the screws.
Use a torque driver and the Micro stix bit to remove the trilobe screw from the bottom speaker (2). Set aside the screw.
Use a torque driver and the super screw bit to remove one super screw from the bottom speaker. Set aside the screw.
Remove the bottom speaker from the enclosure. The battery shim remains on the bottom speaker.
- Caution
Don’t damage the grounding spring on the bottom speaker.
Reassembly
Ensure that the rubber gasket is positioned as shown. If the gasket is out of position, use ESD-safe tweezers to reposition it.
Use the orange torque driver and the super screw bit to install one new super screw (923-11726) into the bottom speaker.
Use the orange torque driver and the JCIS bit to install one new crosshead screw (923-11724) into the bottom speaker. Use the teal torque driver and the JCIS bit to install one new crosshead screw (923-11725) into the bottom speaker.
Use the green torque driver and Micro stix bit to install one new trilobe screw (923-11137) into the bottom speaker.
- Caution: Don’t damage the grounding springs on the bottom speaker.
Reinstall the following parts to complete reassembly: