01 In the Box
Open the package, and take out DJI Flip and its accessories in order, as shown below. Before discarding the packaging box, please make sure to check for any missing items.
| DJI Flip (DJI RC-N3) |
DJI Flip (DJI RC 2) |
DJI Flip Fly More Combo (DJI RC 2) |
 |
 |
 |
02 Preparing DJI Flip
2.1 Preparing Your Drone
• Download App
DJI Flip needs to be operated via the DJI Fly app. Check here to download the app.
• Charging Method
Checking the Battery Level: Press the power button once to check the battery level.
Charging:
Method 1: A Type-C to Type-C PD fast charging cable is included in the package. Additionally, a USB charger* is required for charging your drone. It takes approximately 70 minutes to fully charge one battery.
*The USB charger needs to be prepared separately. It is recommended to use the charging devices provided by DJI, or other USB-C chargers that support PD fast charging protocols.
Method 2: If you purchase the Fly More combo, you can insert all the batteries into the charging hub until they click into place. Then connect the charging hub to a charger via a USB-C port for charging batteries. If the charger’s power is 65W or above, the charging hub can charge two batteries simultaneously, taking approximately 70 minutes to fully charge both.
Please note that the aircraft does not support charging while it is powered on.
• Powering On/Off the Device
Unfold the front arms, and then the rear arms.
Automatic Power-On: Unfolding either one of the rear arms will power on the aircraft by default.
Automatic Power-Off: Folding both rear arms will initiate an automatic countdown for power-off. During the countdown, a press of any button on the aircraft body can cancel the power-off.
Manual Power-On/Power-Off: Press, then press and hold the power button to power on or off the aircraft.
• Installing Propellers
Propellers are already installed in the aircraft upon shipment. When the propeller is broken or deformed, please check the video tutorial to replace the propeller.
2.2 Preparing the Remote Controller
• DJI RC-N3 Remote Controller
- Charging and Usage
Charging: Connect the charger to the USB-C port on the remote controller via USB-C cable.
Usage: Please check out the video in the following.
Note: You can replace the remote controller adapter cable according to the type of port on your mobile device.
- Button Functions
Power Button: Press once, then press and hold the power button for two seconds to power on or off the remote controller.
Refer to the video below to learn about other button functions on the remote controller, such as the shutter/record button, gimbal dial, etc.
• DJI RC 2 Remote Controller
- Charging Method and Powering On/Off
Charging: Connect the charger to the USB-C port on the remote controller via USB-C cable.
Powering On/Off: Press, then press and hold the power button for two seconds to power on or off the remote controller.
- Usage and Activation
Watch the video below to learn how to install the control sticks, set the language, activate the remote controller and more.
2.3 Connection and Linking
If you purchase a DJI Flip together with a remote controller, the remote controller is already linked to the aircraft upon shipment. You can use them directly after activation upon powering on. In other cases, please check out the video in the following.
• DJI RC-N3 Remote Controller: Requires connection to a mobile device. The tutorial uses DJI Neo as an example.
• DJI RC 2 Remote Controller: The tutorial uses DJI Air 3 as an example.
2.4 Activating the Aircraft
The aircraft needs to be activated via DJI Fly when it is used for the first time. Click here to download the DJI Fly app. Open DJI Fly and follow the on-screen instructions. Please ensure that your mobile device remains connected to the internet during the activation process. For detailed instructions, please refer to the video below.
2.5 Firmware Update
A prompt will appear in DJI Fly when a firmware update is available. Update the firmware following the corresponding instructions to ensure optimal flight experience.
- During an update, please do not power off the mobile device or exit the DJI Fly app.
- After the update is completed, the aircraft will be automatically powered off. Restart it manually.
2.6 Checking Your Device
1. Remove the gimbal protector before flight.
2. Make sure the battery, the propellers, and the control sticks are installed properly and securely, and the front and rear arms are fully unfolded.
3. Please check if your devices* and your mobile device have sufficient battery levels.
* Includes the aircraft and the remote controller
03 For Beginners
3.1 Obstacle Avoidance
1. The aircraft supports obstacle avoidance function during manual flight or RTH. When using intelligent shooting and intelligent flight features, the aircraft does not support obstacle avoidance. Please ensure that the obstacle avoidance behavior has been set in the DJI Fly app before the flight. It is recommended for novice users to choose “Brake”.
2. Ensure that the flight mode of the remote controller is set to Normal (N mode). When the flight mode is set to Normal (N mode), it is suitable for most flight scenarios and obstacle avoidance can be enabled. When the flight mode is set to Sport (S mode), the obstacle avoidance function will be automatically disabled.
3.2 Flight Policies
Stay informed about the latest information on flight zones, flight restrictions, and requirements before flight. Strictly adhere to them while operating your aircraft.
For GEO Zone information near you, please tap “Before You Fly” in DJI Fly.
For flight safety regulations in different countries and regions, please explore our Compilation of Global Flight Safety Regulations.
3.3 Flight Environment Requirements
Although the aircraft supports obstacle avoidance, it is recommended to fly in open areas that have good lighting without obstacles. Do not take off or land on sandy surfaces or grounds with fallen leaves or other small lightweight objects to prevent foreign objects like sand, weeds, etc., from entering the aircraft and damaging the motors, gimbal, or propellers. Keep your aircraft within line of sight and stay away from obstacles, crowds, and water surface (at least 6 m above water), etc.
For more flight safety information, please refer to Flight Safety Essentials, which covers key points for responding to flight environments, prevention and management of flight incidents, as well as global flight safety regulations.
3.4 Component Protection
To maintain your aircraft in best condition over time, please take care of important components during use.
• Camera: Avoid exposing the camera lens to environments with laser beams (such as laser shows) or capturing objects which have intense light sources (such as the sun) for a long time to prevent damage to the sensor.
• Gimbal: Avoid collisions or damage to the gimbal, as it contains delicate modules that, if harmed, could impair its functionality.
04 Getting Ready for the First Flight
4.1 Palm Control
• Palm Takeoff/Landing
Takeoff: Hold the sides of the aircraft body from below when taking off. Do not place your fingers within the rotation range of the propellers. If taking off from the open palm of your hand, make sure to fully extend your fingers to avoid touching the propellers.
Landing: Extend your arms horizontally, place your hand underneath the aircraft and wait for the aircraft to land. Make sure to fully extend your fingers to avoid touching the propellers. Do not attempt to grab the sides of the aircraft body during landing in the same manner as during takeoff.
Please note:
1. Power off the remote control devices connected to the aircraft before using Palm Control.
2. Do not fly over water when using Palm Control.
3. When using Palm Control, the max flight altitude of the aircraft is 30 m and the max flight distance is 50 m.
For more information on usage, please refer to the video below.
• Switching Modes
The mode button is on the left side of the aircraft body, near the USB-C port and microSD card slot. Press the mode button on the top to switch among multiple Smart Snaps, including Follow, Dronie, Circle, Rocket, Spotlight, and Custom.
4.2 Mobile App Control
• Wi-Fi Connection and Parameter Settings
Wi-Fi Connection: Connect the aircraft directly to the DJI Fly app on your mobile device via Wi-Fi to control the aircraft using the mobile device.
Parameter Settings: After entering the DJI Fly app, you can set parameters for specific modes or modify camera parameters as needed. For more information on usage, please refer to the video below.
• Manual Control and Mode Switching
Manual Control:
- Takeoff: After entering the DJI Fly app, tap and hold the takeoff icon, then the aircraft will automatically take off.
- Taking Photos and Videos: Tap the Photo/Video icon to switch between photo and video modes. Tap once to start recording and tap again to stop recording in video mode.
- Landing: Tap and hold the landing icon will land the aircraft.
Mode Switching: Check the real-time view on the Controls page. The current shooting mode is displayed at the bottom of the screen. Tap to expand the option list and select the desired mode.
Please note:
1. When using the app control function, the aircraft does not support RTH. Please fly within a controllable area and within visual line of sight.
2. Do not fly over water when using app control.
3. When using app control, the max flight altitude of the aircraft is 30 m and the max flight distance is 50 m.
For more information on usage, please refer to the video below.
• Audio Capture via App
Voice Control: Say “Hey Fly!” to wake up Voice Control and then say voice commands to control the aircraft.
Recording Audio via App: Audio recording with the corresponding audio device will be triggered when the aircraft starts recording.
For more information on usage, please refer to the video below.
4.3 RC Control
• Flight Basics
Auto Takeoff: Tap the takeoff icon, and then press and hold the prompt icon. The aircraft will take off automatically.
Auto Landing: Tap the landing icon, and then press and hold the prompt icon. The aircraft will land automatically.
Manual Takeoff (Take Mode 2 as an example): Start the motor with the left and right control sticks by pushing the them toward or away from each other. After the motors are spinning, release your hand and gently push the left stick upward to take off the aircraft.
Manual Landing (Take Mode 2 as an example): Push the left stick downward to land the aircraft. After landing, hold the left stick downward to stop the motors.
Taking Photos and Videos: Press the photo/video button to switch between photo and video mode. Press the shutter/record button to take a photo or start recording.
For more information on usage, please refer to the video below.
• Smart RTH
Tap the RTH icon in the app, then press and hold the icon in the prompt to initiate RTH. Or press Flight Pause/RTH Button on the remote controller and hold to initiate RTH. The aircraft will perform RTH to fly back to the home point and land on the ground. For more information on usage, please refer to the video below.
4.4 Intelligent Flight Features
• FocusTrack
FocusTrack includes three types of camera movements: Spotlight, Point of Interest (POI), and ActiveTrack.
- Spotlight: Enables the camera to face the subject at all times.
- POI: Allows the aircraft to fly around the subject.
- ActiveTrack: Allows the aircraft to follow the subject.
Please note: The aircraft cannot avoid moving subjects such as people, animals, or vehicles. When using FocusTrack, pay attention to the surrounding environment to ensure flight safety.
For more information on usage, please refer to the video below.
• Other Features
DJI Flip supports Panorama, MasterShots, QuickShots, Hyperlapse, and other intelligent flight modes. For more instructions, please check the video in the following.
05 Auxiliary Functions and Accessory Usage Tips
5.1 ND Filters
ND (Neutral Density) filters are used to reduce the amount of light entering a lens. Check the video below to learn how to install or remove ND filters properly.
06 After Flight
6.1 Exporting Photos and Videos
The aircraft comes with a built-in storage of 2 GB and also supports storage expansion via microSD card.
• Via QuickTransfer
Watch this video to learn how to download photos or videos from the aircraft to the smartphone via QuickTransfer in DJI Fly. The video uses DJI Mini 4 Pro as an example.
• Via USB-C Cable
You can browse or transfer footage by connecting the aircraft to a computer with a cable without powering on the aircraft.
6.2 Storing Your Device
Please fold the aircraft arms correctly and install the gimbal protector, then place the aircraft in the box or storage bag. Incorrect placement of the aircraft will compress the propellers, resulting in their deformation and a decline in propulsion performance.
07 DJI Care Service Plan
DJI Care Refresh is a comprehensive and reliable protection plan that provides DJI products with coverage for a range of accidental damages such as collision, water damage, flyaway, and natural wear.
• Replacement Service: For device damage or flyaway due to normal use or accidental incidents.
• Official Warranty: If any performance failure not attributable to user errors has occurred to the covered components of the aircraft, you can click here to submit an online repair request and enjoy free repair services. Click here to check specific covered components.
There are two DJI Care Refresh plans available for you, 1-Year Plan and 2-Year Plan. Check the Services page on DJI Store for details of supported models and pricing for the two versions.
Note: The DJI Care plans for DJI Flip are renewable.
08 FAQs
• Which remote controllers are DJI Flip compatible with?
A: It is compatible with DJI RC 2, DJI RC-N3 and DJI RC-N2.
• Which goggles and motion controllers does DJI Flip support?
A: It is not compatible with any goggles and motion controllers.
• What languages does DJI Flip voice control support?
A: It supports Mandarin and English. The language supported by DJI Flip voice control depend on the phone system language (Chinese, English).
For more information about the product, please refer to User Manual.
09 Service and Support
DJI Service is dedicated to delivering top-notch, comprehensive product services and support, guaranteeing a hassle-free experience with your devices.
Get easy access to your device info at any time, including activation date, warranty status, and service history.
Keep track of your device’s repair progress in real-time, including service details like quotation, delivery information, and inspection report.
To apply for additional services, check here.
