21.5.2009   

EN

Official Journal of the European Union

C 116/6

—

accreditation is by its nature a public authority activity. This very nature has been substantiated by various kinds of links to the national Governments without changing, however, the basic public authority character and responsibility of accreditation. Over the last years it has become evident that it is necessary to strengthen the public authority aspect of accreditation and consolidate the position of accreditation bodies in EU/EFTA Member States and their relationship with the relevant national authorities,

—

the public authority relationship at the national level is established by different legal solutions in the case of each accreditation body. The regimes are different as are the degrees of responsibility and the extent of the mandates received. Nowadays it is clear that accreditation bodies should enjoy a status whereby they can be considered to exercise public authority,

—

since the 1970s when accreditation started to be used by national authorities in order to put in place the means of measuring the competence of conformity assessment bodies, different approaches and differing systems developed throughout Europe and worldwide. The first initiative to bring the different accreditation services closer at regional and international level was the establishment, in 1976, of WECC — Western European Calibration Cooperation, followed by the creation of the International Laboratory Accreditation Cooperation (ILAC) in 1977. WELAC — Western European Laboratory Accreditation Cooperation was then established in 1987. WECC and WELAC merged in 1994 to form the European co-operation for Accreditation of Laboratories (EAL). Meanwhile, in 1991, the European Accreditation of Certification (EAC) was formed. At the international level the International Accreditation Forum (IAF) in the certification area covering accreditation of certification and inspection bodies was also established. In 1997 EAL and EAC merged to create EA, which was later on in 2000 established as a legal entity. EA is registered under Dutch law as a not-for-profit association which gathers national accreditation bodies acting with public authority in the field of accreditation of all conformity assessment activities,

—

cooperation at European (and international) level between accreditation bodies — aiming at harmonising accreditation rules, procedures and practices to promote and facilitate free global trade — needs to be accompanied and supported by a favourable legislative environment. The said Memorandum of Understanding constituted the first public recognition of EA,

—

with the EEA Agreement, the EFTA States party to the Agreement committed themselves to participating in the Single Market, with the same rights and obligations as the EU Member States. Since the proposed Regulation on accreditation is to be a text of EEA relevance, it should create the same legal basis for the use of accreditation in the EFTA EEA States as in the EU,

—

accreditation policy consistent with these guidelines and the development of quality infrastructure should be of primary importance in Turkey as an intrinsic aspect of the customs union between EU and Turkey and its proper functioning.

—

to play a role in the proper functioning of the internal market, facilitating the free movement of goods and services by ensuring their ability of meeting the needs of the European economy and society taking into account all economic, social, environmental and other public interest aspects and in particular allowing for a high level of protection of health, safety, the environment and consumers,

—

to contribute to the elimination of technical trade barriers by creating confidence in the accredited conformity assessment services and in the corresponding results, thus eliminating the need for multiple accreditations and multiple assessments for products, systems or services in every country where such products and services are marketed and, in this way, contributing to the competitiveness of the European economy,

—

to disseminate and promote the European model of accreditation based on the principles that accreditation bodies act with public authority and that accreditation is carried out free from commercial motivation and in avoidance of competition, both between accreditation bodies and the conformity assessment bodies and also among accreditation bodies themselves,

—

to maintain the role of accreditation as the central pillar of transparency and trust that public authorities and the market place can have in conformity assessment bodies whether operating in the regulated or the non-regulated area,

—

to serve as the last and authoritative level of control of conformity assessment activities with regard to technical competence and professional integrity of conformity assessment bodies, in order to create mutual confidence,

—

to be flexible in adaptation and responsive to the needs of the market as well as to the needs of national public authorities and to serve in this respect as an essential tool for backing up decisions of national public authorities, namely where accreditation is used in support of Community legislation, such as for a justified choice of conformity assessment bodies to be notified as capable to carry out tasks under the Community legislation,

—

to further enhance a more substantial and equal degree of rigour of the accreditation services within EU/EFTA Member States through the development of a comprehensive framework for accreditation with the aim of increasing coherence, equivalence, transparency and co-operation of accreditation services, in both the regulated and the non-regulated area, taking into account the freedom of operators in the voluntary area to use them,

—

to promote output focussed, quality driven and harmonised performance of accreditation bodies duly taking into account both system enablers and system results, ensured by a robust, effective and well-functioning system of peer evaluation between those bodies, with sound and transparent evaluation criteria and procedures,

—

to continuously develop and increase the pertinent knowledge, competence and means that accreditation bodies possess in order to be able to properly assess the competence of a conformity assessment body by determining its technological knowledge and expertise and its capability to carry out assessment in accordance with the applicable requirements, both sector specific and legislative instrument oriented,

—

to encourage accredited conformity assessment bodies to continuously develop and increase their pertinent knowledge, competence and means in order to be able to provide trustworthy and recognized conformity assessment services,

—

to support a high level of quality for all conformity assessment activities whether they are undertaken in the implementation of legislation or not and to enforce transparency in pursuit of these activities. For that purpose, involvement of relevant stakeholders into the development of accreditation policy is essential in order to ensure overall acceptance and a coherent approach,

—

to promote, in close cooperation with EU/EFTA Member States national public authorities, the use of accreditation in new sectors and fields of activity where the potential of accreditation has not yet been fully exploited, in particular in the regulated areas,

—

to contribute to the development of accreditation at international level, especially with the view of strengthening the public interest aspects of accreditation and promoting mutual acceptance and recognition of accreditation certificates and corresponding conformity assessment results worldwide,

—

to promote mutual recognition of testing and inspection reports, certificates and other attestations issued by conformity assessment bodies accredited in an EU/EFTA Member State so as they can offer their services throughout Europe and worldwide without any unjustified restrictions to their activities,

—

to provide candidate countries, potential candidate countries and neighbouring countries with a major tool for reinforcing the adaptation of their economies to the Community market and to promote technical cooperation, assistance and Mutual Recognition Agreements (MRAs) with third countries,

—

to promote research and development reflecting the rapid development of technologies and industrial and service processes, in all areas of conformity assessment, and fostering the use of inter-comparison activities and proficiency testing providing an effective indication of the quality of the outputs of the accredited conformity assessment activities.

—

relations between EA and the public authorities at a European level, as well as with the national public authorities, should be based on the acknowledgement of the common objectives set out in detail in section 3 above, bearing in mind their distinct responsibilities and competencies. They emphasise that a permanent, open and transparent dialogue between them is a fundamental basis for cooperation,

—

the national member bodies of EA have a vital role in the cooperation between EA, the European Commission, EFTA and competent national authorities Member States. Cooperation between all the relevant bodies and common understanding of the objectives set out in section 3 above is essential for these guidelines to be successful,

—

the internal rules of EA should ensure that, whether in the regulated and the non-regulated area, stakeholders in accreditation are adequately represented, so that the broadest possible range of views is taken into account in drawing up accreditation guidelines and other documents and that the procedures are open and transparent,

—

coherence and uniformity, both at European and national level, should be ensured in the development and implementation of accreditation policy, based on the establishment of the effective communication channels and the commitment to actively exchange information,

—

it is essential that effort is made to respond readily and appropriately to differing market needs in different sectors and to the needs of national public authorities whose recourse to accreditation is expected to the utmost possible level, in particular in support of Community legislation.

—

maintain a transparent legal and political framework for accreditation as a tool to develop trust and confidence in conformity assessment and mutual recognition in the corresponding results,

—

make use of accreditation where it is appropriate in support of the implementation of Community legislation and policies, and promote recourse to it for those purposes,

—

promote, in its international relations, the European model of accreditation based on the principles that accreditation bodies act with public authority and that accreditation is carried out free from commercial motivation and in avoidance of competition,

—

consult and cooperate with EA on, and involve EA in, technical matters related to the uniform implementation and operation of Community legislation and policy in the field of conformity assessment and to accreditation, in particular in view of promoting a harmonised, consistent and credible application of relevant standards in relation to Community policy and legislation,

—

call upon EA to answer technical issues or provide necessary expertise on an ad hoc basis in developing specific arrangements to support Community initiatives,

—

ensure the possibility of effective contribution of EA to different sectoral working groups responsible for the development and implementation of Community legislation in relation to accreditation and to call upon EA to develop and revise sectoral accreditation schemes which have to meet specific detailed technology or health and safety or environment related requirements in areas covered by Community legislation,

—

make accessible to EA — when appropriate — the competence available at the Joint Research Centre, in particular at its Institute for Reference Materials and Measurements (IRMM) with respect to improving the quality of conformity assessment results,

—

consider systematically recourse to EA in their international discussions with third countries or international organisations as well as in the implementation of third country trade agreements, when issues relating to the conformity assessment, quality, competence of conformity assessment bodies and accreditation are in question,

—

seek, where appropriate, the advice and active cooperation of EA in the establishment and implementation of European programmes of technical assistance to, and cooperation with, third countries in the fields of accreditation and conformity assessment,

—

facilitate, to the extent possible, a coordinated approach towards accreditation between EA and its member bodies and relevant national public authorities, in particular for the support of the implementation of Community legislation,

—

promote the dissemination of knowledge about accreditation and its potential within its services,

—

support EA in its role in promoting the European model of accreditation in international accreditation fora such as ILAC and IAF and in other regional accreditation co-operations,

—

support EA in the efforts being undertaken in increasing the efficiency and effectiveness of its operation, by being a continually improving and ever more professional organisation.

—

continue to serve as a co-operative network of European national accreditation bodies for the furtherance of equivalence, transparency, consistency and efficiency of accreditation operated throughout the EU/EFTA and beyond,

—

serve the public mission of generating and maintaining confidence in conformity assessment bodies and in their results and to further a transparent and quality led system to evaluate their competence,

—

operate a rigorous, transparent and uniform European peer evaluation system and continue to improve the system. Assurance should be provided that accreditation bodies that have successfully undergone the peer evaluation have the necessary technical expertise and capabilities to assess, attest and regularly monitor the technical competence of conformity assessment bodies, in particular, where members of the European accreditation infrastructure operate accreditation in support of the implementation of Community legislation,

—

ensure that the peer evaluation between its members is operated in such a way that the results may be equivalent across the EU/EFTA and made public and can be justified on the basis of sound and transparent evaluation criteria and procedures, including appropriate appeals procedures. Peer evaluation should also serve as a benchmarking tool in order to stimulate further improvement,

—

put in place an appropriate training system for evaluators to ensure reliable, equal and coherent assessments within the peer evaluation process,

—

ensure that its member bodies are fully accountable towards all interested parties, operate accreditation as a non-profit distributing activity, do not provide any activities that conformity assessment bodies perform, do not compete with other accreditation bodies. Through its members, EA should also ensure that unnecessary burdens are not imposed on economic operators by conformity assessment bodies which they accredit. In addition the conformity assessment bodies which they accredit should, in their activity, take into account, the diversity of companies, their size and the nature of their activities, without reducing the necessary level of protection or quality required. The necessary requirements relating to confidentiality should be also ensured. Similarly, EA member bodies are expected to use the necessary technical expertise and capabilities to assess and attest the technical competence of conformity assessment bodies as well as to regularly monitor the accredited bodies. Where this is related to bodies operating in support of the implementation of Community legislation, necessary coordination with the EU/EFTA Member States′ national authorities is to be ensured, bearing in mind the separation of responsibilities and tasks of EA member bodies from those of other national authorities,

—

enable exchange of information on accreditation issues relevant in particular to the research and development topics. EA should assist the Joint Research Centre — IRMM of the European Commission in identification of priorities and practical arrangement of pan-European inter-laboratory comparisons and training activities. Where appropriate, EA is expected to encourage development of proficiency testing techniques and supply. Moreover EA should cooperate, whenever necessary and appropriate, with the Joint Research Centre’s — IRMM in case of initiatives aiming at the diffusion of the metrological culture and practices through accreditation and accredited conformity assessment services,

—

be responsive towards the European Commission and EFTA as well as the Member States′ national authorities with regard to activities related to Community competencies,

—

to respond readily and appropriately to differing market needs in different sectors and the needs of national public authorities, in particular as far as the implementation and development of Community legislation is concerned. EA shall identify and raise awareness for missing tools for activities linked to the implementation of Community legislation and where possible, participate, on request, in their development,

—

take due account of advice and guidance offered by the European Commission and EFTA, after consultation with the Member States′ national authorities, on policy matters related to accreditation,

—

inform the European Commission and EFTA about policies and activities under development that are of mutual interest and regularly report on EA’s strategic and policy development,

—

cooperate with stakeholders and parties concerned and establish and maintain an appropriate mechanism for them to make their views known,

—

ensure openness, transparency, equivalence and competence in the operation of its procedures. In particular, the process for the preparation of the guidelines should be open to the views and contributions of all bodies representing the interested parties. Regular provision of information to the national authorities and conformity assessment bodies is to be guaranteed as well as coherence with the international level ensured, wherever appropriate,

—

be committed to the delivery of efficient and high quality accreditation that brings added value to the entire conformity assessment market. In particular, EA and its members are expected to develop and implement appropriate strategies and procedures for continuous improvement in terms of both efficiency and competence,

—

actively participate in the activities of international organisations in the field of accreditation and report on these activities to the European Commission and EFTA,

—

be committed at European and international level to adjust the existing rules for a successful peer evaluation so as to open the peer evaluation process to all nationally recognised accreditation bodies in all technical fields, independent of their size and number of accredited conformity assessment bodies,

—

undertake and support actions to improve the visibility of European accreditation and promote the European model of accreditation,

—

provide encouragement to the progress of accreditation bodies in the countries that have applied for EU or EFTA membership, in view of their full participation in and achieving membership of EA. Grant full membership once the appropriate and approved conditions have been met. Endeavour to encourage the development of the quality infrastructures of those countries,

—

cooperate with the European Commission, EFTA and the competent national authorities in the development and implementation of Community and EFTA programmes of technical assistance and cooperation with third countries.